PXL_20260226_005815675.jpg
PXL_20260226_005719709.jpg
PXL_20260226_005815675.jpg
PXL_20260226_005719709.jpg

Ceiling and Wall Mount - For Ring Stick Up Cam

$11.00

Utilize the existing base and mounting plate that comes on your Ring Stick up Cam, and mount your Ring Stick Up Cam on the ceiling or on the wall with this bracket! Reference image 2 for what is provided. All other images show how this bracket can be used to mount your camera.

The Ring Stick Up Cam base itself has a nice ball joint that is removable with a philips screw driver. Remove it from your camera and with this bracket and screw, you maintain full adjustability of your cameras positioning but can now mount it easily on the ceiling or on the wall.

Primary color:

Utilize the existing base and mounting plate that comes on your Ring Stick up Cam, and mount your Ring Stick Up Cam on the ceiling or on the wall with this bracket! Reference image 2 for what is provided. All other images show how this bracket can be used to mount your camera.

The Ring Stick Up Cam base itself has a nice ball joint that is removable with a philips screw driver. Remove it from your camera and with this bracket and screw, you maintain full adjustability of your cameras positioning but can now mount it easily on the ceiling or on the wall.



Note:
Before you install the new bracket, make sure to run the power cable through the bracket, position the bracket on the camera, plug it in and then tighten the supplied stainless screw. If you mount the bracket on without the power cable, you won't be able to plug the cable in.

  • Bracket is 3d Printed ABS in black or white

  • 3/16 allen wrench and philips screw driver needed for install

  • Wire channel allows for the power cable to go through the bracket